News

SALE: Crane gearbox D8-8262-00-000

Đuro Đaković Strojna obrada d.o.o. is selling three-stage gearbox of main lifting with mark 25 N which is normally installed in crane produced by "Đuro Đakovic cranes". Gearbox is completely new, unused and with measurements corresponding for cranes from 25 to 50 t. In the gearbox are installed gears of alloy steel with grinded teeth. Lubrication of gearbox is done by splattoring and additional oil is transferred with oil channels.

On output shaft is monted half of copuling which is neccesary to assemble with rest of the crane.

In attached documents you can find basic information about gearbox, and information about crane for which the gearbox is intended, and also gearbox drawing.

For any additional information, please use the following contact:

Hrvoje Kekez, director

Phone: +385 35 446 469

E-mail: hrvoje.kekez@strojna-obrada.hr

Celebration of the 20th anniversary of Đuro Đaković Strojna obrada d.o.o.

Last week marked the 20th anniversary of the company Đuro Đaković Strojna obrada d.o.o. on Savus Salaš with about a hundred current employees.

PARTICIPATION AT THE INNOTRANS 2022 FAIR

Successful participation of Đuro Đaković Strojna obrada d.o.o. at the InnoTrans 2022 fair at the joint stand of Đuro Đaković Group with ĐĐ Specijalna vozila d.d. and with new sister companies: Promet Group, Vítkovické železnično opravny and MR Wheels

InnoTrans 2022 fair in Berlin

Đuro Đaković Strojna obrada is participating as an exhibitor at the world's leading transport technology fair, InnonoTrans, from September 20 to 23 in Berlin

Presentation of the vibration method

Representative of the Company Đuro Đaković Strojna obrada d.o.o. in cooperation with the Mechanical Engineering Faculty from Slavonski Brod, participated in the International Maintenance Conference organized by the Croatian Society of Maintenance (HDO) which was held in Rovinj.

History of Đuro Đaković Strojna obrada

Growth and development of production in 'Đuro Đaković Strojna obrada d.o.o.' through the history.

Production of new gearboxes

Đuro Đaković Strojna obrada d.o.o. has made three reducers for bridge cranes in nuclear power plants, of which two have a capacity of 160 tons and one has a capacity of 400 tons.

Donation of protective masks for ĐĐ Strojna obrada d.o.o. from Haitu Mechanical Equipment Co., Ltd

A long-time business partner from China, Haiti Mechanical Equipment Co., Ltd., has decided to send a donation of 150 pieces of protective masks to ĐĐ Strojna obrada d.o.o.

Successful production of wood pellets on the production line from ĐĐ Strojna obrada d.o.o.

We have deliverd our longtime customer with a complete line for the production capacity of 1000 kg/h wood pellets. The customer successfully produces wood pellets in his facility, which is equipped to European standards and regulations for the production of wood pellets.

Successful cooperation DD Strojna obrada with the company Softronic SRL

This year Duro Dakovic Strojna obrada has concluded several contracts with Softronic SRL, a Romanian manufacturer of locomotives and electric trains, for the production of a total of 48 drive wheelsets for ASEA electric locomotives,which are continuously supplied to the client.

The approval for a specialized workshop from the Ministry of the Republic of Croatia

On the basis of verification on compliance with the required conditions and norms, at the end of October 2018. the company Đuro Ðaković Strojna obrada d.o.o. has received approval for a specialized workshop for maintenance of wheelsets for rail vehicles by the Ministry.

Permission of Railways Regulatory Board BiH for rail program Đuro Đakovic Strojna obrada Ltd.

Based on the audit performed by the regulatory committee BiH Railways, for company Đuro Đakovic Strojna obrada Ltd. was issued a licence certifying that the products of railway program are approved for use on the railways in the territory of Bosnia and Herzegovina.

Presentation of Đuro Đaković Strojna obrada d.o.o. on the InnoTrans 2018 in Berlin

Đuro Đaković Strojna obrada d.o.o. has participated on this years InnoTrans fair 2018. in Berlin, leading world exhibition for transport industry and tehnology.

The participation of ĐĐ Strojna obrada d.o.o. on the exibithion Innotrans 2018 in Berlin

Đaković Strojna obrada d.o.o. participates this year at the leading international trade fair for transport technology in the world - Innotrans 2018.

CONFERENCE: The future of forestry and wood processing in BiH

A meeting of the economy, profession and politics in the forestry and wood processing sector in Bosnia and Herzegovina and neighboring countries where forests and forest resources are of vital economic importance.

DELIVERY OF THE LARGE GEAR IN THE HISTORY OF ĐURO ĐAKOVIĆ GROUP

ĐURO ĐAKOVIĆ Strojna Obrada d.o.o. made a diameter of 3960 mm, which in 1921 so far it has not been done in the history of ĐURO ĐAKOVIĆ GROUP.

A contract for the purchase of nine sets of axle assemblies has been signed

On 10 November 2017, a contract was signed for the purchase of nine sets of axle assemblies for electric locomotives of series 1 141 and 1 142 owned by HŽ Putnički Prijevoz.

Pellet production line

Innovation at the company "Đuro Đaković Strojna obrada d.o.o." - production of pellet lines for the production of pellets from biomass

DELIVERY OF THE LARGEST GEAR IN HISTORY OF ĐURO ĐAKOVIĆ GROUP

"Đuro Đaković Strojna obrada LTD" has delivered gear diameter of 3880mm for the final customer "Luka Tranzit Osijek LTD".

Presentation of Đuro Đaković Strojna obrada d.o.o. on the InnoTrans 2016 in Berlin

Đuro Đaković Strojna obrada d.o.o. has participated on this years InnoTrans fair 2016. in Berlin, leading world exhibition for transport industry and tehnology.

The participation of ĐĐ Strojna obrada d.o.o. on the exibithion Innotrans 2016 in Berlin

Expansion of the API license for Wellheads and Christmas trees production

ĐĐ Strojna obrada has successfully met all the requirements of American Petroleum Institute and deservedly received a new API license extended to the production of Wellheads and Christmas trees.

The most successful year in Duro Dakovic Strojna obrada after the crisis in 2009.

Closed market, the inability of placing own products and the loss of customers are some of the main consequences of the current crisis in the world and a major cause of the shuting down a large number of businesses.Đuro Đaković Strojna obrada showed how to develop a successful

The new five-axle horizontal drill lathe machine TOS MAXIMA I

Following the strategy of investing in modern production equipment and technology, Duro Dakovic Strojna obrada d.o.o. has invested in the purchase of a new five-axle horizontal drill lathe machine TOS MAXIMA I which was recently put into operation.

DD Strojna obrada: With investment in new technologies we compete in a qualitative way on the global market!

Members of the Duro Dakovic Group show how company, despite the crisis, can operate with a profit. The company, which is a good example of this is the Duro Dakovic Strojna obrada, which since its establishment in 2002 until today produces and successfully carries side by side

The participation of Đuro Đaković Strojna obrada d.o.o. at Valve World Expo 2014 in Düsseldorf

Valve World Expo is the most important international fair of valves and equipment, as well as their components, intended for different industries such as petrochemical, chemical, food and processing, and is held every two years in Düsseldorf.

Offer of measuring service with 3D Measuring arm on the field

Measuring arm Echo Plus 3.2 COORD3 is a portable coordinate measuring equipment based on the Smart Sensor technology. It is used for dimensional control of various kinds, and her application is in control and measurement of workpieces/ position, interphase control, etc.

The participation of ĐĐ Strojna obrada d.o.o. on the largest railway exhibition Innotrans 2014

Innotrans is the largest exhibition in respect of railway theme which attaches the attention of companies and individuals from around the world. Đuro Đaković Strojna obrada d.o.o. has recognized the importance of the exhibition and decided to present own products.

Delivery of the new gearbox for Adria Čelik d.o.o.

The new gearbox of the main lifting cranes D8 has been delivered to the Adria Celik d.o.o., by DD Strojna obrada. The gearbox stands out, among others, with the increased load capacity of cranes of the 50 tons and the ability to operate in extreme conditions.

DD Strojna obrada d.o.o. received deserved Cetificate of API 6A

DD Strojna obrada d.o.o. has successfully met all the requirements of the American Petroleum Institute and received a certificate of API 6A for production of gate valves.

New contract with Croatian oil company INA

The increase in production and contracts within the oil program. Duro Dakovic Strojna obrada d.o.o. has signed a deal of approximately € 700,000.00 for Croatian oil company INA in the area of the oil exploatation valves, class AA, EE and FF for a special project.

Wheelsets overhauling for Amsterdam trams!

DD Strojna obrada d.o.o. cooperates with Bombardier transportation in Amsterdam doing overhauling of wheelsets for Amsterdam trams. More then 130 wheelsets should be overhauled in 2011 and 2012.

CNC Portal machining center

CNC Portal machining center offers more precise and productive machining services to the client's requirements as You can see through the 3D machining service of Kaplan turbines blades.

New equipment - Stress relieve with vibrations

DD Strojna Obrada d.o.o. is equipped with new modern CNC equipment for the VSR (vibration stress relief). Stress relief can be performed on large welded structures, and other constructions difficult even to 18.000 kg.