Last week marked the 20th anniversary of the company Đuro Đaković Strojna obrada d.o.o. on Savus Salaš with about a hundred current employees.

Successful participation of Đuro Đaković Strojna obrada d.o.o. at the InnoTrans 2022 fair at the joint stand of Đuro Đaković Group with ĐĐ Specijalna vozila d.d. and with new sister companies: Promet Group, Vítkovické železnično opravny and MR Wheels

Đuro Đaković Strojna obrada is participating as an exhibitor at the world's leading transport technology fair, InnonoTrans, from September 20 to 23 in Berlin

Representative of the Company Đuro Đaković Strojna obrada d.o.o. in cooperation with the Mechanical Engineering Faculty from Slavonski Brod, participated in the International Maintenance Conference organized by the Croatian Society of Maintenance (HDO) which was held in Rovinj.

Growth and development of production in 'Đuro Đaković Strojna obrada d.o.o.' through the history.

Đuro Đaković Strojna obrada d.o.o. has made three reducers for bridge cranes in nuclear power plants, of which two have a capacity of 160 tons and one has a capacity of 400 tons.

A long-time business partner from China, Haiti Mechanical Equipment Co., Ltd., has decided to send a donation of 150 pieces of protective masks to ĐĐ Strojna obrada d.o.o.

We have deliverd our longtime customer with a complete line for the production capacity of 1000 kg/h wood pellets. The customer successfully produces wood pellets in his facility, which is equipped to European standards and regulations for the production of wood pellets.

This year Duro Dakovic Strojna obrada has concluded several contracts with Softronic SRL, a Romanian manufacturer of locomotives and electric trains, for the production of a total of 48 drive wheelsets for ASEA electric locomotives,which are continuously supplied to the client.

On the basis of verification on compliance with the required conditions and norms, at the end of October 2018. the company Đuro Ðaković Strojna obrada d.o.o. has received approval for a specialized workshop for maintenance of wheelsets for rail vehicles by the Ministry.

Based on the audit performed by the regulatory committee BiH Railways, for company Đuro Đakovic Strojna obrada Ltd. was issued a licence certifying that the products of railway program are approved for use on the railways in the territory of Bosnia and Herzegovina.

Đuro Đaković Strojna obrada d.o.o. has participated on this years InnoTrans fair 2018. in Berlin, leading world exhibition for transport industry and tehnology.

Đaković Strojna obrada d.o.o. participates this year at the leading international trade fair for transport technology in the world - Innotrans 2018.

A meeting of the economy, profession and politics in the forestry and wood processing sector in Bosnia and Herzegovina and neighboring countries where forests and forest resources are of vital economic importance.

ĐURO ĐAKOVIĆ Strojna Obrada d.o.o. made a diameter of 3960 mm, which in 1921 so far it has not been done in the history of ĐURO ĐAKOVIĆ GROUP.

On 10 November 2017, a contract was signed for the purchase of nine sets of axle assemblies for electric locomotives of series 1 141 and 1 142 owned by HŽ Putnički Prijevoz.

Innovation at the company "Đuro Đaković Strojna obrada d.o.o." - production of pellet lines for the production of pellets from biomass

"Đuro Đaković Strojna obrada LTD" has delivered gear diameter of 3880mm for the final customer "Luka Tranzit Osijek LTD".

Đuro Đaković Strojna obrada d.o.o. has participated on this years InnoTrans fair 2016. in Berlin, leading world exhibition for transport industry and tehnology.

Đuro Đaković Strojna obrada d.o.o. is selling three-stage gearbox of main lifting with mark 25 N which is normally installed in crane produced by "Đuro Đakovic cranes".

ĐĐ Strojna obrada has successfully met all the requirements of American Petroleum Institute and deservedly received a new API license extended to the production of Wellheads and Christmas trees.

Closed market, the inability of placing own products and the loss of customers are some of the main consequences of the current crisis in the world and a major cause of the shuting down a large number of businesses.Đuro Đaković Strojna obrada showed how to develop a successful

Following the strategy of investing in modern production equipment and technology, Duro Dakovic Strojna obrada d.o.o. has invested in the purchase of a new five-axle horizontal drill lathe machine TOS MAXIMA I which was recently put into operation.

Members of the Duro Dakovic Group show how company, despite the crisis, can operate with a profit. The company, which is a good example of this is the Duro Dakovic Strojna obrada, which since its establishment in 2002 until today produces and successfully carries side by side

Valve World Expo is the most important international fair of valves and equipment, as well as their components, intended for different industries such as petrochemical, chemical, food and processing, and is held every two years in Düsseldorf.

Innotrans is the largest exhibition in respect of railway theme which attaches the attention of companies and individuals from around the world. Đuro Đaković Strojna obrada d.o.o. has recognized the importance of the exhibition and decided to present own products.

The new gearbox of the main lifting cranes D8 has been delivered to the Adria Celik d.o.o., by DD Strojna obrada. The gearbox stands out, among others, with the increased load capacity of cranes of the 50 tons and the ability to operate in extreme conditions.

DD Strojna obrada d.o.o. has successfully met all the requirements of the American Petroleum Institute and received a certificate of API 6A for production of gate valves.

The increase in production and contracts within the oil program. Duro Dakovic Strojna obrada d.o.o. has signed a deal of approximately € 700,000.00 for Croatian oil company INA in the area of the oil exploatation valves, class AA, EE and FF for a special project.

DD Strojna obrada d.o.o. cooperates with Bombardier transportation in Amsterdam doing overhauling of wheelsets for Amsterdam trams. More then 130 wheelsets should be overhauled in 2011 and 2012.

CNC Portal machining center offers more precise and productive machining services to the client's requirements as You can see through the 3D machining service of Kaplan turbines blades.

DD Strojna Obrada d.o.o. is equipped with new modern CNC equipment for the VSR (vibration stress relief). Stress relief can be performed on large welded structures, and other constructions difficult even to 18.000 kg.